Glaco DX + Glaco Glass Compound Roll On
Glaco DX + Glaco Glass Compound Roll On
Glaco DX & Glaco Glass Compound Roll On – excellent visibility in all conditions
A windscreen that has been thoroughly cleaned and protected with Glaco liquid wiper is not only about cleanliness and easier car washing. Above all, it stands for unobstructed visibility, which translates into road safety and driving comfort, regardless of the conditions. Pre-order our easy-to-use Glaco DX & Glaco Glass Compound Roll On set and go for comfort, safety and visibility. With Glaco you see more and react faster.
Glaco Compound Roll On – deep cleaning for your car’s windows
Glaco Glass Compound Roll On is an incredibly effective glass cleaner that perfectly prepares your car windows for the application of Glaco liquid wipers. You can use it to remove any dirt, streaks, road film or even residues of old coatings from the glass.
Glaco DX – state-of-the-art glass coating technology
Since its debut in 2022, Glaco DX has won the favour of hundreds of thousands of car owners across Europe. This latest Japanese coating makes the glass extremely slippery, so that rain or dirt slides off the glass as you drive. Thanks to it, you don't have to use the windscreen wipers as often and the sight of obstructive drops and sheets of water will be a thing of the past.
How to apply: Glaco Glass Compound Roll On
 |
Tip |
| Glaco Glass Compound Roll On: Do not allow the product to dry completely. If the product gets on any non-glass surface, wipe it off immediately. |
| 1 | Prepare the glass surface by washing it thoroughly with a pH-neutral shampoo. |
| 2 | Shake the bottle well. |
| 3 | Optionally, lightly dampen the surface of the glass to facilitate the work. |
| 4 | Squeeze the bottle lightly and start spreading the product by running the felt applicator over the glass. |
| 5 | Rinse the compound thoroughly. Use high-pressure water if needed. |
How to apply: Glaco DX
| 1 | Remove the applicator cap, place the product on the glass and lightly squeeze the bottle to soak up the felt part of the applicator. |
| 2 | Apply the product evenly in a criss-cross motion, pressing the applicator gently against the surface of the dry glass. |
| 3 | Wait until white residue appears on the glass. |
| 4 | Allow the product to dry for approximately 5-10 minutes and then wipe off any remaining residue with a slightly damp microfibre. |
| 5 | Use a dry and clean microfibre to remove all remaining residue until the glass is perfectly clear. |
|
Tip |
| Glaco DX: After application, make sure the glass is perfectly clear and free from any residue. Incomplete removal may result in wiper judder. |
